CD 145-184

Side wire groove - Double petticoat

CD 165

CD 165

Size: 79mm x 98mm 3.125" x 3.875")

Previous

Range

Next

Years produced: 1941-1960s
Style (CD) scarcity: 10, 1,000+ common regardless of shape, color/marking.
Intended use: Secondary Power
Style / catalog number: 20
Number of unique insulators:
3
Notes: "Modern" replacement for the CD 164. It took less glass to make then the insulator it was replacing. The CD 163 and CD 165 are two of the last styles of Hemingray insulators to have drip points.

The smooth base (SB) units are quite difficult to get. They are the earliest examples for this CD.

Primary Embossing = Embossing on the front of the insulator, usually is that manufacturers name or the customers name. No embossing units will be noted as NO EMBOSSING. Units with no name but with numbers or letters will be noted as NO NAME.

Examples:
HEMINGRAY
S.B.T.&.T.Co
NO NAME
NO EMBOSSING

EIN = Embossing Index Number is a standardized way to identify each unique embossing.

(FS) = Front Skirt
(RS) = Rear Skirt
(DO) = Dome
(CR) = Crown
(FC) = Front Crown
(RC) = Rear Crown
(BG) = Between Grooves
(FA ) = Front, Above wire groove
(FB) = Front, Below wire groove
(BE) = Base Embossed
(FU) = Front Umbrella
(RU) = Rear Umbrella
(FCE) = Front Center
(RCE) = Rear Center
(TE) = Top Ear
(TOP) = Top of Pinhole
/ = Next line of embossing

There are unique characteristics of the insulator that are not related to the embossing, but is worth noting.

Examples:
Factory molded brass bushing
Flaired skirt
MLOB = Mold Line Over Base
Waffle top
Wide saddle groove

Base = the bottom of the insulator. It is noted in the following standardized ways.

SDP = Sharp Drip Points
RDP = Round Drip Points
CB = Corrugated Base
SB = Smooth Base

= Insulator has been verified that exists
= Insulator has been verified that exists, but not listed in the "guide"
= Insulator has not yet been verified as existing
= Suspected error listing in the "guide" because listing does not match up with known manufacturing practices. Such as numbers and dots on an aqua insulator, or insulators listed with both factory molded brass bushing and without. Many do not come in both configurations and are listed as coming in both. Etc.

Color = The approximate color of the insulator. Due to manufacturing variations, insulators with the same color name maybe slightly different in actual appearance.

Primary Embossing EIN Embossing Special Features Base Color Verified?

HEMINGRAY

[010]

(FS) HEMINGRAY-20 (RS) MADE IN U.S.A./(Numbers and dots)

RDP

Clear

HEMINGRAY

[010]

(FS) HEMINGRAY-20 (RS) MADE IN U.S.A./(Numbers and dots)

RDP

Light Straw

HEMINGRAY

[020]

(FS) HEMINGRAY-20 (RS) MADE IN U.S.A./(Numbers and dots)

SB

Clear

Share this page on:

Like or Follow on Facebook: